We want to share an important update with our Betfair Community users.
Over the coming months, the Betfair Community platform will be winding down. The final active day for the platform will be December 21st. From December 22nd, users will no longer be able to access the platform.
Your discussions, insights, engagement, and, most importantly, feedback have helped shape the platform and guided innovation. Your feedback continues to be important to us, and we will continue to listen via our dedicated feedback channels, as well as through product testing and innovations.
To share your feedback and experience, visit: https://support.betfair.com/app/home
|
By:
Nuh. Noosa is as far north as I have been and that was a long time ago.
|
|
By:
Joel, I've had many happy family holidays at Airlie Beach. There are a couple of Pubs mainly frequented by backpackers.
|
|
By:
Last week I finally got around to doing a job I've been wanting to do for the last 2 years. Changing the rocker cover gasket on the VW Golf. I've had an oil leak on this thing for years and like 80% of engine oil leaks it was from the rocker cover. It's at the top of the engine so spills down over everything. If you smell oil burning it's probably oil coming from the rocker cover down onto the exhaust manifold. Unfortunately with the Golf it's not that easy to get to. It's not like an HQ Holden where the engine is all exposed and changing the gasket takes less than 15 minutes. The Golf has an inlet manifold that sits on top of the engine and makes the job a pain in the ass. That's why I've been putting it off so long.
|
|
By:
![]() ![]() |
|
By:
The first photo shows the engine with the engine covers on.
The second shows engine covers off and the inlet manifold. The screwdriver is pointing to the location a spark plug. It's possible to remove the spark plugs with the manifold in place but it's frustrating,needs the proper tools and takes me over an hour. The plugs haven't been changed for about 30 thousand k's so they're due and it will be so much easier with the manifold off. |
|
By:
Does Tommy help you?
|
|
By:
![]() ![]() |
|
By:
The top photo the screwdriver indicates where the manifold joins the block. There are eight bolts. The bottom photo shows the rocker cover. Note oil and grease everywhere. To the left the tall plastic thing with a barcode on it is the cover for the timing belt. On some engines if you don't get these replaced and they break they can fxck up your engine. Remember this. Car manufacturers consider 100,000kms to be the life of a car.
Note also the blue cap on the coolant reservoir tank. The thread on that cap is fxcked and no longer watertight. Just ordered one off ebay for $26. |
|
By:
![]() ![]() ![]() |
|
By:
Noted.
|
|
By:
Top photo shows the throttle body. Now is a good time to give it a good clean up. Hasn't been done for about 30k.
Middle and bottom photos show the inlet manifold held up by an octopus strap. Lots of degreasing to do. Unfortunately I couldn't figure out how to detach the manifold any further from the wiring so after I unbolted the rocker cover I had to carefully get it out from underneath. It wasn't easy. |
|
By:
![]() ![]() ![]() |
|
By:
That's pretty shiny.
|
|
By:
New plugs and new ignition leads.
Bottom photo shows the inlet ports. I cleaned off old gasket sh1t and applied gasket paste. Bolted it all back together. Took about 1/4 to reassemble as it did to disassemble. Plugs $55, leads $75, gasket $65. Total $195. I reckon mechanic would've charged $800+. Car's running great. No leaks!! |
|
By:
Does it get you to the boozatorium in record time?
|
|
By:
No. I only ever walk to the BOOZATORIUM. Walking with Tommy and drinking beer is all part of the experience.
|
|
By:
Have you ever fallen asleep in a BOOZATORIUM?
|
|
By:
I'm about 95% sure I haven't. Getting the supplies in is usually at the beginning of a session.
|
|
By:
I've made a FOOL of myself in there many times though!!!!
|
|
By:
I haven't found a decent one here yet, they sell booze at 7-11 here though. There was a chap sleeping on the floor in there. Or maybe he was dead.
|
|
By:
Where's here?
|
|
By:
Singapore still
|
|
By:
Are you heading up to Thailand? Maybe you could hook up with Johnny Drama.
|
|
By:
I'd rather hook up with Poon or whatever her name was. I'm not sure yet.
|
|
By:
He's probably full of sh1t.
|
|
By:
No doubt
|
|
By:
No need for alarm about the outside threads of the old spark plugs looking all sh1tty and seedy like Monday Mike on a Sunday morning. That's just Loctite.
|
|
By:
Phew.
Thanks for that. |
|
By:
I owned one of these in about 1989-1993 and I've always regretted selling it. I always regret selling nearly every car I've owned! I wouldn't mind getting another one.
http://www.carpoint.com.au/all-cars/private/details.aspx?R=SSE-AD-3402448&Cr=8 |
|
By:
Did a little job today. It's always bothered me that there's about 2 foot of electrical cable between the distributor and the ignition cable despite the fact they are right next to each other. There's already enough stuff between the V of the V12 and I wanted to get rid of a bit.
![]() |
|
By:
Stripped the black cover off the cables for a better look.
![]() |
|
By:
Cut the cables and stripped the wires. Twist the tiny wires. Put each end in a hook shape and join together. Put the heat shrink covers in place.
![]() |
|
By:
You're gonna need more lipstick
alot more! |
|
By:
![]() ![]() Job done. Black loom over everything. Got rid of 20 inches of surplus cable. Black loom is not original obviously but most of the cables in the V were so covered in oil and grease that even with cleaning they still look sh1t. The looms are cloth and you just can't clean them up. |
|
By:
Put a couple of belts back on today. Then I realised I'll probably have to remove them again to put on aircon belt. Doesn't matter. With radiator off at present accessing these belts is dead easy and only takes a minute to remove.
![]() |
|
By:
I still like the look of the belts on the engine!
|
|
By:
Yeah...sniff.
Monet would be proud. Envious even ![]() |
|
By:
Check out this E-Type. The ultimate Jag. Think I'll paint mine this same colour.
https://www.youtube.com/watch?v=8FImagxrmdM |
|
By:
Why not paint it a rust colour and save on long term maintenance?
|
|
By:
![]() |