In the UK and Republic of Ireland, there are seven grades of surface, which are:[4] hard firm good to firm good good to soft soft heavy Since 2009, in addition to the official description of the going, British racecourses are required to report penetrometer readings on the day of the race. A penetrometer designed by Cranfield University and TurfTrax, known as the 'GoingStick', is used for these measurements.[5] The 'hard' grade is rarely used, as a racetrack with this type of surface is generally deemed to be dangerous to both horses and jockeys. No races took place on tracks rated as 'hard going' between 2008 and 2013.[5] In Ireland the term "yielding" is used for "good to soft" going. For artificial surfaces in the UK the official grades are: fast standard to fast standard standard to slow slow
In the UK and Republic of Ireland, there are seven grades of surface, which are:[4]hardfirmgood to firmgoodgood to softsoftheavySince 2009, in addition to the official description of the going, British racecourses are required to report penetrometer
Carry on Angoose - Good to Yielding, Yielding to Soft? Can you put them in your little chart please, so Muggins here can understand? Going stick readings would of course be a tremendous help - I doubt if the Irish use those either!
Carry on Angoose - Good to Yielding, Yielding to Soft? Can you put them in your little chart please, so Muggins here can understand? Going stick readings would of course be a tremendous help - I doubt if the Irish use those either!
Carry on Angoose - Good to Yielding, Yielding to Soft?
Yielding is slightly worse than good but better than soft. So yielding to soft is tightening the ground description instead of just saying good to soft. Plenty of times in the UK ground is declared as good to soft when in fact there's no good in it a
Yielding is slightly worse than good. So in declaring yielding to soft instead of good to soft they're tightening the ground description instead of just saying good to soft. Plenty of times in the UK ground is described as good to soft when there's actually no good in it.
Yielding is slightly worse than good. So in declaring yielding to soft instead of good to soft they're tightening the ground description instead of just saying good to soft. Plenty of times in the UK ground is described as good to soft when there's a
Hard Firm Good to Firm Good Good / Good to Soft or Good to Yielding Good to Soft or Yielding Good to Soft / Soft or Yielding to Soft Soft Heavy
Inbetweeers in italics
HardFirmGood to FirmGoodGood / Good to Soft or Good to YieldingGood to Soft or YieldingGood to Soft / Soft or Yielding to SoftSoftHeavyInbetweeers in italics