General Betting
There is currently 1 person viewing this thread.
23 Jun 12
13:34
Joined:
Date Joined:
14 Aug 07
I have just recently started getting huge interference on the analogue radio in my office. By switching all the electrical bits and pieces in the office one by one, I have narrowed the problem down to one of my PC monitors – as soon as I switch it off the interference stops.
I have a multiple monitor setup including another one that is exactly the same so I switched the wires over and the same monitor causes the interference (therefore eliminating the wiring).
Before I shell out for a new monitor, does anyone have any suggestions as to the cause? And any way to remedy it?
Thanks
I have a multiple monitor setup including another one that is exactly the same so I switched the wires over and the same monitor causes the interference (therefore eliminating the wiring).
Before I shell out for a new monitor, does anyone have any suggestions as to the cause? And any way to remedy it?
Thanks
sort by:
Show
per page
Replies: 3
|
By:
Switch off your radio and do some work.
h2h  |
|
By:
There's a good chance The monitor power lead has lost it's "ferrite choke"
Search google images if you don't know what a ferrite choke looks like. Try another power lead from a monitor which doesn't cause the problem. . http://comm-n-sense.blogspot.co.uk/2011/05/all-about-ferrite-chokes.html |
|
By:
Is it a CRT or LCD monitor? Try changing the refresh rate (60/70/80 etc), which in turn might move an offensive frequency off your radio bandwidth.
|