There is currently 1 person viewing this thread.
i have been trying for the past hour to connect my" ex box " to my wireless router
the problem being i cannot remember my WPA2 code and have ben guessing numerous answers but to no avail
my question is how can i find this in my computer
or ....can i reset the router and just re programme it
thanks in advance
the problem being i cannot remember my WPA2 code and have ben guessing numerous answers but to no avail
my question is how can i find this in my computer
or ....can i reset the router and just re programme it
thanks in advance
sort by:
Show
per page
Replies: 8
|
By:
Should be on ya wireless box, on the underneath.
Normally letters and no.s bout 12 digits long. |
|
By:
It's a bugger, innit. :(
|
|
By:
thanks for your help but it didn't work
but i've just discovered a link on the router to be able to find it out ... hopefully anyway and yes it is a bugger |
|
By:
Open a window on your pc
in the internet address box type 192.168.1.1 hit enter will ask for admin user name and password. enter what you put when you set it up. if you've not set one it will probably either be "admin" for both or "admin" for name and leave password blank. this gets you into router settings. go to wireless setup/security. wpa2 passcode will be there. :) |
|
By:
if its a belkin it'll be 192.168.2.1 btw
|
|
By:
thanks guys but i dont seem to do it
i'll leave it and have a good look for the password i must have written it down somewhere |
|
By:
connect pc to router via ethernet cable then try what i said
|
|
By:
or 192.168.0.1 even more likely
|